Перейти до основного вмісту

Вигляд на Місто трав у ночі

Мітки:

Коментарі

Дописати коментар

Популярні дописи з цього блогу

Home assistant - modbus - HHC-N8I8OP

Thanks to https://www.cncwiki.org/index.php?title=HHC-N8I8OP  I managed to connect this buggy module to home assistant using modbus integration: It is important to have verify delay big to not break logic.  modbus:   - type: tcp     host: 192.168.222.222     port: 5000     name: "modbus1"     switches:       - name: "hhc_r8"         address: 16         write_type: coil         verify:           delay: 36       - name: "hhc_r7"         address: 17         write_type: coil         verify:           delay: 37       - name: "hhc_r6"   ...
Дописати коментар
Докладніше

HomeAssistant gadinan camera rest commands pan and tilt

 Add following to restcommand.yaml and include in config.yaml:   # rest_command: ptz_control_right : url : "http://192.168.16.253/PSIA/YG/PTZCtrl/channels/0/continuous?pan=1&tilt=0" method : PUT headers : Cookie : "cur_UserInfo=admin%3A123456; cur_userName=admin;" Content-Length : "0" ptz_control_left : url : "http://192.168.16.253/PSIA/YG/PTZCtrl/channels/0/continuous?pan=-1&tilt=0" method : PUT headers : Cookie : "cur_UserInfo=admin%3A123456; cur_userName=admin;" Content-Length : "0" ptz_control_stop : url : "http://192.168.16.253/PSIA/YG/PTZCtrl/channels/0/continuous?pan=0&tilt=0" method : PUT headers : Cookie : "cur_UserInfo=admin%3A123456; cur_userName=admin;" Content-Length : "0" ptz_control_up : url : "http://192.168.16.253/PSIA/YG/PTZCtrl/channels/0/continuous?pan=0&tilt=1" method : PUT headers : Cookie : "c...
Дописати коментар
Докладніше